3-乙氧基-6-取代苯氧基哒嗪除草活性的相关性研究

在分子拓扑理论的基础上,构建了新的结构信息价连接性指数mχY和取代基染色指数I,并用它们研究了3 乙氧基 6 取代苯氧基哒嗪的除草活性pI50与其结构之间的定量关系,给出了相关方程,相关性良好,复相关系数分别为R1=0.9807、R2=0.9926、R3=0.9881,并预测了几个化合物的pI50值,预测值pI50(cal.)与测定值pI50(exp.)相当吻合.新方法计算方便、结果可靠.     

聚丙烯酸长链酯的Huggins常数与其分子量的依赖性关系

聚丙烯酸高碳醇酯(PBA)及聚丙烯酸十八醇酯(POA)是具有长烷基侧链的梳状聚合物,在溶剂苯中的Huggins常数(k′)随其分子量(M)的变化而变化.在PBA-苯体系中发现,当M低于某一临界分子量(MLC)时,k′随分子量的降低显著增大;当M大于某临界分子量(MHC)时,k′随分子量的升高而增大;当M在MLC～MHC时,k′基本上保持不变.而在POA-苯体系中发现,当M低于某一临界分子量(MC)时,k′随分子量的降低显著增大;当M大于该临界分子量(MC)时,k′在0.33～0.43变化.文中同时给出了精确算法用来计算PBA-苯体系及POA-苯体系中PBA及POA的特性粘度.当k′＞0.758时,用稀释外推法计算;当0.758＞k′＞0.426时,用一点法公式[η]=ηsp/C(√)ηr计算;当0.426＞k′＞0.334时,用另一一点法公式[η]=(√)2(ηsp-lnηr)/C计算.     

Ab initio study of sodium intercalation into metal oxides

Using the full-potential linearized augmented plane wave (FP-LAPW) method, we have studied the effect of chemistry on the average intercalation voltage (AIV) caused by the Na ions intercalating into transition metal oxides. The effect of transition metal was systematically studied by varying M=Co, Ni and Mn in NaMO₂ and fixing the α-NaFeO₂ layered structure. The effect of the guest atoms into the host material is discussed in terms of the structural and electronic properties. Comparatively to Li intercalation, a significant electron transfer towards transition metal was found. This observation suggests that the transition metal contribute to the AIV determination and confirms the common assumption that intercalated electron reduces M⁴⁺ to M³⁺.     

人原始生殖细胞的分离和体外培养

从4～10周龄药物流产胚胎的生殖嵴和肠系膜组织中分离原始生殖细胞(primordial germ cells,PGCs),培养在添加人重组白血病抑制因子(rh LIF)、人重组碱性成纤维细胞生长因子(rh bFGF)和Forskolin的小鼠饲养层细胞上.经过4～7 d培养,PGCs形成典型的鸟巢状集落.集落在传代过程中保持碱性磷酸酶活性,且胚胎阶段性特异抗原1(SSEA-1)、胚胎阶段性特异抗原3(SSEA-3)免疫荧光染色呈阳性.具有分化潜能的PGCs能在体外连续传代培养12代.结果表明从药物流产胚胎中分离的人类PGCs可以在体外培养成为具有分化潜能的多能性干细胞.     

基于遗传算法构建巴耳末公式

基于遗传算法构建了巴耳末公式．通过建立合适的拟合数学模型，用计算机对数学模型进行优化，使之尽可能反映氢原子实际谱线分布，并求出经验常量和拟合公式，最后分析了所得结果．     

Novel ethero atoms containing polyesters based on 2,6‐naphthalendicarboxylic acid: A comparative study with poly(butylene naphthalate)

Poly(butylene naphthalate) (PBN), poly(diethylene naphthalate) (PDEN), and poly(thiodiethylene naphthalate) (PTDEN) were synthesized and characterized in terms of chemical structure and molecular weight. The polyesters were examined by TGA, DSC, and DMTA. All the polymers showed a good thermal stability, even though depending on chemical structure. At room temperature they appeared as semicrystalline materials; the effect of the introduction along the PBN polymer chain of ether oxygen atoms or sulfur ones was a lowering in the T_g value, a decrement of T_m, and a decrease of the crystallization rate. Changing in chemical structure also affects the main α absorption associated with the glass transition which moves to lower temperature and whose energetic requirements decrease. The results were explained as due to the presence of highly flexible C? S? C or C? O? C bonds in the polymeric chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1694–1703, 2007     

Synthesis and characterization of poly(vinyl alcohol)‐graft‐[poly(D,L‐lactide)/poly(D,L‐lactide‐co‐glycolide)] hydrogels

Poly(D ,L ‐lactide) and poly(D ,L ‐lactide‐co‐glycolide) with various composition and with one methacrylate and one carboxylate end group were synthesized and grafted onto poly(vinyl alcohol) (PVA) via the carboxylate group. The graft copolymers were crosslinked via the methacrylate groups using a free radical initiator. The polymer networks were characterized by means of NMR and studied qualitatively by means of IR spectroscopy. The influence of the glycolide content in the polyester grafts and of the number of ester units in the grafts on thermal properties and swellability were studied as well. The high swellability in water is characteristic of all hydrogels. Differential scanning calorimetry (DSC) showed a single glass transition temperature that occurs in the range between 51 and 69 °C. Thermogravimetric analysis (TGA) of the networks showed the main loss in weight in the temperature range between 290 and 370 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4536–4544, 2007     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

压缩真空场与原子非线性作用过程中的纠缠与消纠缠

用Von Neumann熵研究了附加克尔介质的压缩真空场与二能级原子依赖强度耦合相互作用量子体系的量子纠缠特性.讨论了初始压缩真空场的压缩度以及克尔非线性作用的强度对该量子体系纠缠特性的影响.结果表明，克尔介质的非线性作用的强弱可以改变体系量子纠缠的周期性；在初始压缩度较大（r=5）时，克尔介质的非线性作用可导致原子与场持续地处于最大纠缠态，无消纠缠态或持续地处于消纠缠态. 关键词： 压缩真空态 克尔介质 依赖强度耦合J-C模型 Von Neumann熵 量子纠缠